Loading...
Publication
Modeling and simulation of biomass pyrolysis and gasification processes
| Name: | Description: | Size: | Format: | |
|---|---|---|---|---|
| 1 MB | Adobe PDF |
Advisor(s)
Abstract(s)
In computer simulation, the processes and equipment operate following the sequence of input data, data processing, and return output data. Typically, these data are mass flows, temperatures,
compositions, and pressures. Specifically, modeling and simulation of gasification systems aid in predicting the outlet gas composition when operating conditions and scale size alter. This assists in
planning the construction or retrofitting of existing equipment. UniSim Design is a chemical process modeling software, similar to Aspen Plus and Aspen Hysys. It is used in engineering to create
dynamic and steady-state models for plant design, monitoring, troubleshooting, planning, and management [1]. However, regardless of the software used for modeling and simulation of the
gasification process, there is a pattern of steps that must be followed in order to successfully perform the simulation. Therefore, this process is divided into 4 main steps: Drying or removal of
moisture present in the biomass until 5% w/w; followed by Pyrolysis, which was split into Devolatilization, and Char cracking, both calculated with the help of Microsoft Excel; Combustion, where
oxidation equilibrium reactions are added; and finally the Reduction step, which is divided in the heterogeneous and homogeneous stages, where equilibrium reactions are also inserted
Description
Keywords
Biomass Research Subject Categories::TECHNOLOGY
Pedagogical Context
Citation
Maldonado, Pedro; Lenzi, Giane G.; Gomes, Helder; Brito, Paulo (2022). Modeling and simulation of biomass pyrolysis processes. In XXIInd SGEM GeoConference. Vienna
Publisher
Universidade de Santiago de Compustela