Logo do repositório
 
A carregar...
Miniatura
Publicação

Fire resistance of composite slabs with steel deck: experimental analysis and numerical simulation

Utilize este identificador para referenciar este registo.
Nome:Descrição:Tamanho:Formato: 
USB_PEN_DRIVE_Full_Paper_7385_pp_309_320.pdf4.73 MBAdobe PDF Ver/Abrir

Orientador(es)

Resumo(s)

This work investigates the thermal behaviour of composite slabs with steel deck under controlled test conditions corresponding to a fire from the bottom. This composite solution consists of a concrete topping cast on the top of a steel deck. The concrete is typically reinforced with a steel mesh and may also contain individual rebars. The deck also acts as reinforcement and may be exposed to accidental fire conditions from the bottom. This composite solution is widely used in every type of buildings and requires fire resistance, in accordance to regulations and standards. Composite slabs need to meet fire-safety requirements according to building codes. The fire assessment of this type of elements is normally made using standard fire tests. Two samples are being prepared to be tested and should take into account the criterion for stability (R), Integrity (E) and insulation (I). The scope of this investigation concerns the fire rating for insulation (I). Numerical simulation was performed through Matlab PDE toolbox for the thermal effects of standard fire exposure. The results are also compared with the simplified method proposed by Eurocode, which seems to be unsafe.

Descrição

Palavras-chave

Composite slabs Fire resistance Thermal performance Numerical simulation

Contexto Educativo

Citação

Piloto, P.A.G.; Prates, Lucas; Balsa, Carlos; Rigobello, Ronaldo (2018). Fire resistance of composite slabs with steel deck: experimental analysis and numerical simulation. In 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials / 11th National Congress on Experimental Mechanics. Porto, Portugal. p. 309-320. ISBN 978-989-20-8771-9

Projetos de investigação

Unidades organizacionais

Fascículo

Editora

INEGI-Instituto de Ciência e Inovação em Engenharia Mecânica e Gestão Industrial

Licença CC