Publication
Experimental and numerical evaluation of bond properties between reinforcement and concrete
| dc.contributor.author | Moreno, Carlos | |
| dc.contributor.author | Bastos, Ana Sarmento | |
| dc.date.accessioned | 2010-02-01T11:15:05Z | |
| dc.date.available | 2010-02-01T11:15:05Z | |
| dc.date.issued | 2006 | |
| dc.description.abstract | A study of the bond behaviour between steel reinforcement bars and four different types of surrounding concrete: normal strength concrete (NSC), steel fibber reinforced concrete (SFRC) and two structural lightweight aggregate concretes (SLWAC) is here presented. Five beam-tests according to Standard RILEM (1982) [5] were conducted on specimens under monotonously increased loading. Bond-slip response curves between concretes and reinforcement are obtained and discussed. The results obtained show that standard bond length of 10∅d is not adequate to determine bond characteristics of reinforcement in concretes with grades higher than C 25/30. Bond failure of the NSC beam did not occur but the bar itself failed. Bond failure was observed for NSC beam and for LWAC and SFRC beams when reduced bond length of 5∅d was used. A numerical simulation of the beam tests using the finite element method analysis, using bond-slip model of CEB-FIP Model Code 1990 [1] and real properties of test materials, was also carried out and the results are compared with the experimental values. | pt |
| dc.identifier.citation | Moreno, Carlos; Bastos, Ana Sarmento (2006). Experimental and numerical evaluation of bond properties between reinforcement and concrete. In 5th International Conference on Mechanics and Materials in Design. Porto. p.37-38 | pt |
| dc.identifier.uri | http://hdl.handle.net/10198/1637 | |
| dc.language.iso | eng | pt |
| dc.subject | Bond | pt |
| dc.subject | Slip | pt |
| dc.subject | Bond stress | pt |
| dc.subject | Normal-strength concrete | pt |
| dc.subject | RILEM beam test | pt |
| dc.title | Experimental and numerical evaluation of bond properties between reinforcement and concrete | pt |
| dc.type | conference paper | |
| dspace.entity.type | Publication | |
| oaire.citation.conferencePlace | Porto, 24-26 July 2006 | pt |
| oaire.citation.endPage | 38 | pt |
| oaire.citation.startPage | 37 | pt |
| oaire.citation.title | 5th International Conference on Mechanics and Materials in Design | pt |
| person.familyName | Moreno | |
| person.givenName | Carlos | |
| person.identifier.orcid | 0000-0001-9140-2299 | |
| rcaap.rights | openAccess | pt |
| rcaap.type | conferenceObject | pt |
| relation.isAuthorOfPublication | 4174c2aa-c755-41f3-b0db-19219e39c22f | |
| relation.isAuthorOfPublication.latestForDiscovery | 4174c2aa-c755-41f3-b0db-19219e39c22f |