Laboratory of Robotics and Engineering Systems

Funder

Organizational Unit

Publications

A Review of Novel Heat Transfer Materials and Fluids for Aerospace Applications

Publication . Nobrega, Glauco; Cardoso, Beatriz D.; Souza, Reinaldo Rodrigues de; Pereira, José Eduardo; Pontes, Pedro; Catarino, Susana O.; Pinho, Diana M.D; Lima, Rui A.; Moita, Ana S.

The issue of thermal control for space missions has been critical since the early space missions in the late 1950s. The demands in such environments are heightened, characterized by significant temperature variations and the need to manage substantial densities of heat. The current work offers a comprehensive survey of the innovative materials and thermal fluids employed in the aerospace technological area. In this scope, the materials should exhibit enhanced reliability for facing maintenance and raw materials scarcity. The improved thermophysical properties of the nanofluids increase the efficiency of the systems, allowing the mass/volume reduction in satellites, rovers, and spacecraft. Herein are summarized the main findings from a literature review of more than one hundred works on aerospace thermal management. In this sense, relevant issues in aerospace convection cooling were reported and discussed, using heat pipes and heat exchangers, and with heat transfer ability at high velocity, low pressure, and microgravity. Among the main findings, it could be highlighted the fact that these novel materials and fluids provide enhanced thermal conductivity, stability, and insulation, enhancing the heat transfer capability and preventing the malfunctioning, overheating, and degradation over time of the systems. The resulting indicators will contribute to strategic mapping knowledge and further competence. Also, this work will identify the main scientific and technological gaps and possible challenges for integrating the materials and fluids into existing systems and for maturation and large-scale feasibility for aerospace valorization and technology transfer enhancement.

2024Journal article

Open access

Experimental Investigation of Green Nanofluids: Assessment of Wettability, Viscosity and Thermal Conductivity

Publication . Nobrega, Glauco; Cardoso, Beatriz D.; Barbosa, Filipe; Pinho, Diana; Abreu, Cristiano; Souza, Reinaldo Rodrigues de; Moita, Ana S.; Ribeiro, J.E.; Lima, Rui A.

Metallic nanoparticles are a type of nanomaterial synthesized from metallic precursors. Due to their unique physiochemical, electrical, and optical properties, metallic nanoparticles are widely studied and applied in various areas such as medicine, electronics, and heat transfer systems. However, conventional synthesis methods to produce metallic nanoparticles face challenges such as instability and environmental concerns, prompting the exploration of greener synthesis methods. Green synthesis uses natural resources like plants and algae as reducing agents, offering a more environmentally friendly approach for the synthesis of metallic nanoparticles. These green-synthesized metallic nanoparticles can enhance heat transfer by becoming part of nanofluids (NFs), which are colloidal mixtures of NPs in a fluid base. NFs, employed for heat transfer. As a result, it is essential to characterize the NFs regarding wettability, viscosity, and thermal conductivity. The results of the spectrophotometer confirmed the green synthesis of NPs, and it was observed that the increase in NP concentration impacted the contact angle, improving the ability to wet. The thermal conductivity is also modified, with an improvement of 11.3% compared to distilled water, without a significant increase in fluid viscosity.

2024Conference paper

Restricted access

Exploring heat exchange in space: Recent advances in two-phase fluid experiments in microgravity

Publication . Nobrega, Glauco; Afonso, Inês Santos; Cardoso, Beatriz D.; Souza, Reinaldo Rodrigues de; Moita, Ana S.; Ribeiro, J.E.; Lima, Rui A.

Thermal regulation has assumed a central role in space expeditions ever since the inception of Sputnik-1 in 1957. Throughout the years, numerous techniques have been developed to regulate temperatures in spacecraft and space habitats. Initially, passive systems like heat shields and thermal linings were employed, while newer missions embrace active cooling using fluids like ammonia and water. With significant advancements in lunar exploration, thermal management systems have been integrated to ensure effective heat protection and dissipation. Experiments carried out in drop towers, parabolic flights, sounding rockets, and aboard the International Space Station (ISS) have yielded valuable insights into the physics of fluids, pool boiling, boiling in two-phase flow, and cooling phenomena. However, conducting tests in microgravity conditions can lead to lower performances, and accurate numerical simulations remain a challenge. At present, various organizations are conducting research to drive progress in thermal management and enhance the technology of space devices. This review describes the most recent advances in two-phase fluid experiments in microgravity. Furthermore, the major challenges that persist in this field are presented and discussed, along with observations on trends and possibilities for the future of thermal control in space. This review attempts to be a relevant guide for future research and developments on thermal control in space.

2024Journal article

Open access