Repository logo
 
Publication

Removal of Cu and Cr from an industrial effluent using a packed-bed column with algae gelidium-derived material

dc.contributor.authorVilar, Vítor J.P.
dc.contributor.authorMartins, Ramiro
dc.contributor.authorBotelho, Cidália
dc.contributor.authorBoaventura, Rui
dc.date.accessioned2010-02-18T12:31:43Z
dc.date.available2010-02-18T12:31:43Z
dc.date.issued2009
dc.description.abstractThe purpose of this work was to evaluate the potential of algal waste from the agar extraction industry, immobilized in a polymer, and the algae Gelidium itself, the raw material of agar extraction, to remove Cu(II) and Cr(III) from industrial effluents. The study involved a Cu(II) bearing effluent and the mixture of this effluent with an effluent containing Cr(VI), previously reduced to Cr(III). The two effluents were collected from metal plating plants, and then filtered and diluted before the biosorption studies. Biosorption results were compared with those obtained from pure Cu(II) and Cu(II)/Cr(III) solution adsorption experiments. Three consecutive adsorption (≈50 mg Cu(II)/l)-desorption (0.1 M HNO3) cycles were carried out with algae Gelidium and two with the composite material, for the Cu(II) effluent. The biomass uptake capacity remained almost constant and close to the obtained for adsorption from pure Cu(II) solution, suggesting that the biomass lifetime was long enough to be used in a continuous industrial process. In the biosorption from Cu(II)/Cr(III) mixtures it was observed that Cr leave the column after the residence time, suggesting that the reduction of Cr(VI) to Cr(III)was not completely achieved. Cr(VI) speciation in aqueous solution produces negatively charged species, that do not bind to the negatively charged carboxylic groups on the biosorbent surface and a low breakthrough time is obtained. An “overshoot”was observed for the Cu(II) concentration, suggesting that Cr(III) has a higher affinity to the binding sites than Cu(II).pt
dc.identifier.citationVilar,Vitor; Martins,Ramiro;Botelho,Cidália; Boaventura, Rui (2009). Removal of Cu and Cr from an industrial effluent using a packed-bed column with algae gelidium-derived material. Journal of Hydrometallurgy. ISSN 0304-386X. 96:1-2, p.42-46pt
dc.identifier.doi10.1016/j.hydromet.2008.07.015
dc.identifier.issn0304-386Xpt
dc.identifier.urihttp://hdl.handle.net/10198/1995
dc.language.isoeng
dc.publisherElsevierpt
dc.subjectChromiumpt
dc.subjectCopperpt
dc.subjectBiosorptionpt
dc.subjectAlgal biomasspt
dc.subjectIndustrial effluentspt
dc.titleRemoval of Cu and Cr from an industrial effluent using a packed-bed column with algae gelidium-derived materialpt
dc.typejournal article
dspace.entity.typePublication
oaire.citation.endPage46pt
oaire.citation.startPage42pt
oaire.citation.titleJournal of Hydrometallurgypt
person.familyNameMartins
person.givenNameRamiro
person.identifier.ciencia-idEA17-F39C-29C7
person.identifier.orcid0000-0003-4327-7782
rcaap.rightsopenAccesspt
rcaap.typearticlept
relation.isAuthorOfPublicationbf713e37-c17f-4a4e-8323-a7b770a038bf
relation.isAuthorOfPublication.latestForDiscoverybf713e37-c17f-4a4e-8323-a7b770a038bf

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
12_Hydrometallurgy 96 (2009) 42-62 (Vitor et al, Ramiro).pdf
Size:
1.01 MB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.82 KB
Format:
Item-specific license agreed upon to submission
Description: