Repository logo
 
Publication

Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method

dc.contributor.authorRibeiro, J.E.
dc.contributor.authorLopes, Hernani
dc.contributor.authorQueijo, Luis
dc.contributor.authorFigueiredo, Daniel
dc.date.accessioned2017-02-17T14:41:09Z
dc.date.available2017-02-17T14:41:09Z
dc.date.issued2017
dc.description.abstractThis paper presents a study of the Taguchi design application to optimize surface quality in a CNC end milling operation. The present study includes feed per tooth, cutting speed and radial depth of cut as control factors. An orthogonal array of L9 was used and the ANOVA analyses were carried out to identify the significant factors affecting the surface roughness. The optimal cutting combination was determined by seeking the best surface roughness (response) and signal-to-noise ratio. The study was carried-out by machining a hardened steel block (steel 1.2738) with tungsten carbide coated tools. The results led to the minimum of arithmetic mean surface roughness of 1.662 µm, being the radial depth of cut the most influent parameter, with 64% of contribution for the workpiece surface finishing.pt_PT
dc.description.versioninfo:eu-repo/semantics/publishedVersionpt_PT
dc.identifier.citationRibeiro, J.E.; Lopes, H.; Luis, Queijo; Figueiredo, D. (2017). Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method. Periodica Polytechnica Mechanical Engineering. ISSN 0324-6051. 61:1, p. 30-35pt_PT
dc.identifier.doi10.3311/PPme.9114
dc.identifier.issn0324-6051
dc.identifier.urihttp://hdl.handle.net/10198/14038
dc.language.isoengpt_PT
dc.peerreviewedyespt_PT
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/pt_PT
dc.subjectMillingpt_PT
dc.subjectCutting parameterspt_PT
dc.subjectOptimizationpt_PT
dc.subjectSurface roughnesspt_PT
dc.subjectTaguchi methodpt_PT
dc.titleOptimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi methodpt_PT
dc.typejournal article
dspace.entity.typePublication
oaire.citation.endPage35pt_PT
oaire.citation.issue1pt_PT
oaire.citation.startPage30pt_PT
oaire.citation.titlePeriodica Polytechnica Mechanical Engineeringpt_PT
oaire.citation.volume61pt_PT
person.familyNameRibeiro
person.familyNameQueijo
person.givenNameJ.E.
person.givenNameLuís
person.identifierR-000-6Y8
person.identifier.ciencia-id0F15-FB62-29DB
person.identifier.ciencia-id9310-5CB5-7BA1
person.identifier.orcid0000-0001-6300-148X
person.identifier.orcid0000-0002-6445-4330
person.identifier.ridG-3839-2018
person.identifier.scopus-author-id25638652400
rcaap.rightsopenAccesspt_PT
rcaap.typearticlept_PT
relation.isAuthorOfPublicationc90169e6-7889-4270-a096-35b98c75f9f9
relation.isAuthorOfPublication85efb15b-2f3e-4315-bdd3-f898797a4a52
relation.isAuthorOfPublication.latestForDiscoveryc90169e6-7889-4270-a096-35b98c75f9f9

Files

Original bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
9114-23834-2-PB.pdf
Size:
649.22 KB
Format:
Adobe Portable Document Format
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.75 KB
Format:
Item-specific license agreed upon to submission
Description: