Browsing by Author "Pinto, Andry"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
- An optimization approach for the inverse kinematics of a highly redundant robotPublication . Costa, Paulo Gomes da; Lima, José; Pereira, Ana I.; Costa, Pedro; Pinto, AndryThis paper describes a robot with 12 degrees of freedom for pick-and-place operations using bricks. In addition, an optimization approach is proposed, which determines the state of each joint (that establishes the pose for the robot) based on the target position while minimizing the effort of the servomotors avoiding the inverse kinematics problem, which is a hard task for a 12 DOF robot manipulator. Therefore, it is a multi-objective optimization problem that will be solved using two optimization methods: the Stretched Simulated Annealing method and the NSGA II method. The experiments conducted in a simulation environment prove that the proposed approach is able to determine a solution for the inverse kinematics problem. A real robot formed by several servomotors and a gripper is also presented in this research for validating the solutions.
- Cable robot for non-standard architecture and construction: A dynamic positioning systemPublication . Moreira, Eduardo; Pinto, Andry; Costa, Paulo Gomes da; Moreira, António Paulo G. M.; Veiga, Germano; Lima, José; Sousa, Jose Pedro; Costa, PedroIn the past few years, cable-driven robots have received some attention by the scientific community and the industry. They have special characteristics that made them very reliable to operate with the level of safeness that is required by different environments, such as, handling of hazardous materials in construction sites. This paper presents a cable-driven robot called SPIDERobot, that was developed for automated construction of architectural projects. This robot has a rotating claw and it is controlled by a set of 4 cables that allow 4 degrees of freedom. In addition to the robot, this paper introduces a Dynamic Control System (DCS) that controls the positioning of the robot and assures that the length of cables is always within a safe value. Results show that traditional force-feasible approaches are more influenced by the pulling forces or the geometric arrangement of all cables and their positioning is significantly less accurate than the DCS. Therefore, the architecture of the SPIDERobot is designed to enable an easily scaling up of the solution to higher dimensions for operating in realistic environments.
- A cable-driven robot for architectural constructions: a visual-guided approach for motion control and path-planningPublication . Pinto, Andry; Moreira, Eduardo; Lima, José; Sousa, José Pedro; Costa, PedroCable-driven robots have received some attention by the scientific community and, recently, by the industry because they can transport hazardous materials with a high level of safeness which is often required by construction sites. In this context, this research presents an extension of a cable-driven robot called SPIDERobot, that was developed for automated construction of architectural projects. The proposed robot is formed by a rotating claw and a set of four cables, enabling four degrees of freedom. In addition, this paper proposes a new Vision-Guided Path-Planning System (V-GPP) that provides a visual interpretation of the scene: the position of the robot, the target and obstacles location; and optimizes the trajectory of the robot. Moreover, it determines a collision-free trajectory in 3D that takes into account the obstacles and the interaction of the cables with the scene. A set of experiments make possible to validate the contribution of V-GPP to the SPIDERobot while operating in realistic working conditions, as well as, to evaluate the interaction between the V-GPP and the motion controlling system. The results demonstrated that the proposed robot is able to construct architectural structures and to avoid collisions with obstacles in their working environment. The V-GPP system localizes the robot with a precision of 0.006 m, detects the targets and successfully generates a path that takes into account the displacement of cables. Therefore, the results demonstrate that the SPIDERobot can be scaled up to real working conditions.
- A fast and robust kinematic model for a 12 DoF hyper-redundant robot positioning: an optimization proposalPublication . Lima, José; Pereira, Ana I.; Costa, Paulo Gomes da; Pinto, Andry; Costa, PedroThis paper describes an optimization procedure for a robot with 12 degrees of freedom avoiding the inverse kinematics problem, which is a hard task for this type of robot manipulator. This robot can be used to pick and place tasks in complex designs. Combining an accurate and fast direct kinematics model with optimization strategies, it is possible to achieve the joints angles for a desired end-effector position and orientation. The optimization methods stretched simulated annealing algorithm and genetic algorithm were used. The solutions found were validated using data originated by a real and by a simulated robot formed by 12 servomotors with a gripper.