Please use this identifier to cite or link to this item:
|Title:||Improvement of the recycle technologies for C5/C6 isomerization by layered PSA|
|Author:||Bárcia, Patrick da Silva|
Silva, José A.C.
|Citation:||Bárcia, Patrick; Silva, José A.C.; Rodrigues, Alirio (2010) - Improvement of the recycle technologies for C5/C6 isomerization by layered PSA. IN Book of Abstracts FOA . Japan|
|Abstract:||The objective of this work consists in studying the separation mono/dibranched paraffins by cyclic adsorption process using a layered bed of zeolites 5A and Beta (Figure 1). Aspen ADSIM 2006.5 (AspenTech Inc.) was used for numerically solving an adiabatic dynamic model incorporating mass, energy and momentum balance. Model parameters were taken from experimental data reported in the literature 1, 2. Parametric studies were simulated to determine how process performance is affected by purge quantity, 5A-to-Beta ratio, repressurization/blowdown schemes and operating temperature. Figure 2 shows that a combination of zeolites 5A and Beta can produce an octane gain of 1 RON comparatively to the conventional TIP 3 by reducing the monobranched C6 fraction in the product. Another advantage of this configuration is the possibility to increase the penetration distance because zeolite Beta acts like a “barrier” to the linear alkanes desorbed from zeolite 5A during the co-current depressurization step. It was also demonstrated that a slight increase in temperature (20 K) results in a RON benefit of 0.2 points. Several alternatives are provided to improve the performance of the existing TIP processes with this combination of adsorbents.|
|Appears in Collections:||DTQB - Resumos em Proceedings Não Indexados ao ISI/Scopus|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.