Utilize este identificador para referenciar este registo: http://hdl.handle.net/10198/14038
Título: Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method
Autor: Ribeiro, J.E.
Lopes, H.
Luis, Queijo
Figueiredo, D.
Palavras-chave: Milling
Cutting parameters
Optimization
Surface roughness
Taguchi method
Data: 2017
Citação: Ribeiro, J.E.; Lopes, H.; Luis, Queijo; Figueiredo, D. (2017) - Optimization of cutting parameters to minimize the surface roughness in the end milling process using the Taguchi method. Periodica Polytechnica Mechanical Engineering. ISSN 0324-6051. 61:1, p. 30-35
Resumo: This paper presents a study of the Taguchi design application to optimize surface quality in a CNC end milling operation. The present study includes feed per tooth, cutting speed and radial depth of cut as control factors. An orthogonal array of L9 was used and the ANOVA analyses were carried out to identify the significant factors affecting the surface roughness. The optimal cutting combination was determined by seeking the best surface roughness (response) and signal-to-noise ratio. The study was carried-out by machining a hardened steel block (steel 1.2738) with tungsten carbide coated tools. The results led to the minimum of arithmetic mean surface roughness of 1.662 µm, being the radial depth of cut the most influent parameter, with 64% of contribution for the workpiece surface finishing.
Peer review: yes
URI: http://hdl.handle.net/10198/14038
ISSN: 0324-6051
Aparece nas colecções:DTM - Artigos em Revistas Indexados ao ISI/Scopus

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
9114-23834-2-PB.pdf649,22 kBAdobe PDFVer/Abrir    Acesso Restrito. Solicitar cópia ao autor!


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.