Utilize este identificador para referenciar este registo: http://hdl.handle.net/10198/11877
Título: Analysis of stresses in drilled composite materials
Autor: Fernandes, M.G.A.
Natal, Renato
Fonseca, E.M.M.
Palavras-chave: Stresses
Bone damage
Bone drilling
Data: 2015
Editora: IEEE Publisher
Citação: Fernandes, M.G.; Natal R.; Fonseca E.M.M. (2015) - Analyis of stresses in drilled composite materials. In 4th IEEE Portuguese Meeting on Bioengineering. Porto, Portugal. p. 83-86. ISBN 978-147998269-1
Resumo: In this study, a three-dimensional dynamic model was built to simulate the drilling process in the composite materials. With an explicit dynamic simulation it is possible to obtain large structural deformation and to apply high intensity loading in a short time frame. Using this methodology, the influence of different cutting parameters were considered during the drilling process in typical composite materials. Also, similar tests were produced in laboratory using composite blocks. Each composite material was instrumented with strain gauges to obtain the strain in different surface positions during the drilling process. The results from the numerical methodology were compared with the experimental methodology. It was concluded when the feed-rate is higher the stresses and strains in the composite material are lower. The obtained numerical and experimental results were similar. Therefore the developed numerical model proved to be a great tool in this kind of analysis.
Peer review: yes
URI: http://hdl.handle.net/10198/11877
DOI: 10.1109/ENBENG.2015.7088834
Aparece nas colecções:ESTiG - Publicações em Proceedings Indexadas à WoS/Scopus

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ACI37.pdf4,8 MBAdobe PDFVer/Abrir


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.